5c Installing the Printer Driver (Mac)
6
Installing Ink Cartridges
Connect the
Publisher to
your PC with
your beige USB
2.0 Cable.
•
With the cover open, press the Cartridge
Button on the top of the Publisher to
move the Ink Cartridge Carrier to the load
position.
Remove each ink cartridge
from its packaging.
Slowly remove the tape
covering the cartridge's
print head.
DO NOT TOUCH THE
COPPER AREA!
Insert the ink cartridges into the carrier,
copper end first and snap the cartridge
cover in place. Insert the color in the right
holder, monochrome black in the left
cartridge holder. The cartridge labels are
color coded to the cartridge covers.
•
•
The printer
driver will auto-
matically install.
To verify the driver installed or reinstall go to
the Mac System Preferences (Apple - System
Preferences). Click the Print and Fax Icon.
•
The driver will appear as shown below. To
manually add the driver click the + button.
•
Close the Publisher's front cover.
7 Aligning the Cartridges
If you are using a PC the Installer will prompt
you to align the cartridge.
If you are using a Mac you will be prompted
to align the cartridge before you print for the
first time.
Note:An alignment print is required every time
you install a new cartridge. The software
will always prompt you to align the
cartridges. Make sure there is an unprinted
disc in the bin for this alignment.
8
Publishing a Disc
Congratulations, you are now ready to start Printing and burning discs!
•
•
For Instructions on printing or Publishing a disc see Section 3 of the User's Manual.
For help with problems printing discs using a PC or Macintosh please visit
© 2009 All rights reserved
P/N 511263-110909
|