Philips Home Theater System MCD735 User Manual

MCD 735  
Quick Start Guide  
BAND  
BAND  
What’s in the Box?  
You should find these items upon opening the box.  
Remote control with two  
Subwoofer cable  
AC power cord  
A/V cord (R/W/Y)  
AAA batteries  
Quick Start Guide  
1
User Manual  
2
Quick start guide  
User manual  
FM and AM antennas  
Control Cable  
 
Setting the clock  
IMPORTANT!  
To set clock in the Eco Power mode, press and hold STANDBY-ON/ECO POWER 2 on the set  
for 3 seconds or more to switch to normal standby mode first before proceeding with the  
procedures below.  
1
In standby mode, press and hold CLOCK on the remote.  
2
When the hour digits flash,turn VOLUME-/+ on the system or press VOLUME+/- on the  
remote to set the hours.  
3
Press CLOCK again and the minute digits flash.Then turn VOLUME-/+ on the system or  
press VOLUME+/- on the remote to set the minutes.  
4
Press CLOCK again to confirm the time setting.  
Setting DVD menu options  
IMPORTANT!  
If the progressive scan feature is activated but the connectedTV does not support  
progressive signals or the cables are not connected accordingly, see the user  
manual for proper progressive scan setup or deactivate the progressive scan  
feature as below:  
1)Turn off yourTV progressive scan mode or turn on to interlaced mode.  
2) Press SYSTEM on the remote to exit the system menu and then DISC and1”  
to exit progressive scan.  
DIVX(R) VOD  
Tip  
See chapters "Preparations" and "System Menu Options" in the User  
Manual for detailed descriptions.  
 
Playing a disc  
1
Press OPEN •CLOSE (ç on the remote) to open the disc tray and load in a disc, then  
press the same button again to close the disc tray.  
Make sure the label side of the disc is facing up.  
2
Playback will start automatically. If not pressÉÅ.  
3
To stop playback, press PRESET-/9 (9 on the remote).  
Programming and tuning to radio stations  
1
Press SOURCE (TUNER on the remote) to select tuner source.  
2
Press PROG on the remote for more than two seconds to program all available stations in  
order of waveband.  
3
Press PRESET+/- (CH +/- (¡ / ) on the remote) until the desired preset station is  
displayed.  
Notes for remote control:  
First, select the source you wish to control by  
pressing one of the source select keys on the remote  
control (DISC orTUNER,for example).  
Tip  
Detailed playback features and  
additional functions are described in the  
accompany owner's manual.  
Then select the desired function ( 2;, í, ë for  
example).  
2005 C Koninklijie Philips Electronics  
N.V. All rights reserved.  
PDCC-JS/JW-0627  
 

Pelco Digital Camera C2946M User Manual
Philips Baby Accessories 240BW8 User Manual
Philips Cell Phone CTX500GRY User Manual
Philips Projection Television 9P5040C1 User Manual
Philips Projection Television 55PP9717 User Manual
Philips Speaker System HSB2351 F7 User Manual
PIONEERPOS Network Card G24 L User Manual
Polycom Server PathNavigator User Manual
Premier Mounts Projector Accessories PDS 017 User Manual
ProForm Home Gym PFST12020 User Manual